P 147 Black is a solvent based, “wet look” impregnator for black granite and natural stone materials. It provides excellent water/oil repellency while supplying a deeper black colour to the stone surface without changing or altering the clarity of the stone pattern.

This can be applied to compact materials without leaving any film or greasy effect to the stone. Treatment allows the material to breath, non yellowing and UV resistant.

Application:   Ensure surface is clean before applying evenly by brush, sponge or spray.  Allow to dry for 10 minutes before removing product excess by clean cloth. Allow surface to dry for 6 hours before resuming normal use of treated surface. DO NOT APPLY TO HEATED SURFACES OR UNDER DIRECT SUNLIGHT. On very absorbent materials, apply additional coats at 30 minute intervals.

The technical advice is given in good faith but without warranty.  All products should be tested for their suitability prior to application/use.  In no event shall Granite Tool Supplies (Wholesale) Ltd be liable for incidental or consequential damages. 
ALWAYS TEST FIRST.