MA 90 is a heavy duty, solvent based “wet look” solvent sealer for use on internal or external natural stones.  It provides excellent water/oil repellency while leaving a glossy, shiny effect to the stone surface, also enhancing the natural stone veins. MA90 is UV resistant and will not yellow or leave any film or greasy effect on the stone surface.  

MA90 will allow the stone to breathe and can be used on rough marble, granite and natural stone. Antique stone, terracotta surfaces, cement and general masonry materials.

Application:  Ensure surfaces are clean and dry before applying small amounts evenly by brush or lambswool drawstring bonnet until the desired surface effect is obtained. Excess application may cause a sticky/tacky surface residue. Repeat the process if required.  Allow to dry for 12 hours before resuming use of treated area. DO NOT APPLY TO HEATED SURFACES OR UNDER DIRECT SUNLIGHT.

Approximate coverage per litre: 15-20m². (Depending on material absorption)